The core of the terminal's automatic control is that the control unit must be reliably segregated from the sensors and actuators to avoid interference and to perform this function well and to ensure that the field signal matches the low voltage required by the electronic control unit. Can be used for process control of peripheral devices and control, signal and regulator devices between the interface components, and apply to different voltage and power range.
The terminals have good electrical and mechanical properties. The screws are made of high strength copper alloy, the conductors are made of electrolytic copper, and the crimp frames are made of alloyed copper corrosion resistant to corrosion cracking. These metal surfaces are also tinned or nickel plated to protect them. The terminal blocks avoid the battery effect of steel metal parts and copper wires in humid environments.
Wiring terminal features, the use of existing rail-type terminal WUK connection technology, and the installation of electronic components composed of the circuit to achieve the transmission of the photoelectric coupling.The core of the automatic control is the control unit must be reliable with the sensors and actuators Isolate, so as not to interfere, to be able to complete this function well and to ensure that the field signal matches the low voltage required by the electronic control unit and can also be used to control the peripheral equipment and control between the signal and the regulator Interface components, and for different voltage and power range.
